When a job has been design approved, you are required to submit the procedure and obtain clearance to proceed before you can carry out the work to Cadent’s network. Depending on the scope of the job, this could be a Start Date Notification (SDN), Routine Operation (RO) or Non-Routine Operation (NRO) and the table below details the criteria for each.
| CtP | Criteria | Lead time | Form | E-mail address |
|---|---|---|---|---|
| SDN | LP ≤63mm | 3 working days | SDN | networkdesign@cadentgas.com |
| RO | LP ≤12”/355mm | 5 working days | RO | sco.networkcontrol@cadentgas.com |
| NRO |
| 5 working days | NRO | sco.networkcontrol@cadentgas.com |
*Further information on determining whether an RO or NRO is required can be found in IGEM/GL/6
If your works require an easement, we will not be able to allow you to plan your works in with us until we have confirmation that the document has been signed and sealed by our legal team.
People who need to work on gas networks must register under the safe control of operations (SCO) scheme.
If you have any enquiries relating to safe control of operations please contact sco.networkcontrol@cadentgas.com
Email us at networkdesign@cadentgas.com
or call us on 0845 366 6758
IGT / UIP submissions: Pete O’Neill 0778 590 6608
Analysis: Monir Uddin 0787 050 4664 / Andrew Gilfeather 0797 181 4627
Completions: Hannah Dakin-Stevens 0781 239 1187 / Lee Tedds 0797 041 9669
